Shrink packaging machine in the use of how to solve the problem

Sealing shrink wrap machine is very useful, but customers in the use of shrinking packaging machine, will often encounter some problems. Compared with the traditional packaging machine, shrinking packaging machine in all aspects of a technical breakthrough, not only can reduce production costs, but also improve the product display effect, the two significant advantages of the heat shrink packaging machine to build For the packaging industry's most popular packaging machine.

The following Xiaobian will be introduced in detail for the two shrinking packaging machine outstanding advantages.

Shrink packaging cost is low. Part of the product packaging, especially for cans can be used to shrink the shrink film shampoo instead of cartons. The method is to put the tray at the bottom and then heat shrink the product. For example, before packaging with a carton, and then packaged with a baler, and now into the bottom with the tray, and then use the pe film shrink machine, the cost can save about 30%. And easy handling, with a portable or forklift can be removed once. Others such as beverages, medicine, chemical and other industries as well. This advantage is evident in certain suitable industries or products.

Shrink packaging machine in the use of the process will encounter what problems? How to solve it? Xiaobian today to share the experience for you! The following are the same as the "

1, in the multi-object cluster packaging, the device can not detect the packaging of objects, packaging damage to the packaging, packaging work can not be carried out, how to do?

Solution: This is because the heat shrink packaging machine in the cluster packaging when the middle of the gap between the objects affect the detection of electric eye, only need to heat shrink packaging machine electric eye detection angle can be adjusted to avoid the above phenomenon The production. The following are the same as the "

2, shrinking packaging machine in the packaging production, the packaging temperature rise slowly or can not meet the standard packaging temperature (160 ℃ above), packaging can not achieve the desired packaging effect, how to do? (Common knowledge extension: heat shrink packaging machine maximum temperature)

Solution: first of all should first check the heater main power line, the heater line is the main power line through a magnetic switch and then to the electric tube, so it should first check the magnetic switch contacts are normal. The following are the same as the "

3, the equipment in the work of the film is easy to offset and can not be normal feeding, so that the heat shrink packaging machine can not normally heat shrink packaging, how to adjust?

Solution: You can adjust the film roll position and tension balance bar, if both are invalid, can be adjusted by the angle of the upper triangle to solve. If the upper layer of material deviation from the folder chain, the upper triangle can be adjusted clockwise; such as the lower layer of material deviation from the folder chain, the upper triangle can be adjusted counterclockwise. This will solve this problem.